Ultrasonic Thickness Gauges PCE-TG 75
Giao hàng miễn phí toàn quốc
Hỗ trợ tư vấn kỹ thuật 24/7 (cả dịp Lễ, Tết)
Bảo hành nhanh chóng khi khách hàng phản hồi
Products code
: PCE-TG 75Brands
: PCE InstrumentsOrigin
: ĐỨCUnit
: MáyProducts status
: Hàng Mới 100%Product Price
: Liên hệ
Giá tốt hơn nơi đâu bạn thấy!
Ultrasonic Thickness Gauges PCE-TG 75
Ultrasonic Thickness Gauges with data memory / Adjustable speed of sound /
Calibration reference mounted on the housing / Material thickness measurement up to 225 mm /
Limit alarm / Optional ISO calibration certificate
The ultrasonic thickness gauges can measure material thicknesses up to 225 mm / 8.85". So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding speed of sound in the Ultrasonic Thickness Gauges. For materials such as steel, aluminum, zinc, silver and gold, the appropriate sound speeds are already stored in the device library. This means that the Ultrasonic Thickness Gauges can be used universally.
With the limit value function in the ultrasonic thickness gauges, individual maximum and minimum values can be stored. If the measured value of the test piece is outside the limits, the Ultrasonic Thickness Gauges signals this visually. If necessary, the signaling can also be done acoustically by the ultrasonic thickness gauges in addition to the visual display. This is why the ultrasonic thickness gauges is used, for example, in quality assurance and in incoming goods inspections.
The ultrasonic thickness gauges has a data memory on which the measured values can be recorded. After a measurement sequence, the stored measurement values can be analyzed directly on the Ultrasonic Thickness Gauges. The stored data are graphically displayed by the Ultrasonic Thickness Gauges. In addition, each individual measuring point can be approached and read in the graphics of the ultrasonic thickness gauges. For a simplified analysis of the measured values, the average, the largest and smallest measured value is displayed on the Ultrasonic Thickness Gauges. The Ultrasonic Thickness Gauges can optionally be equipped with an ISO calibration
SPECIFICATION
| Measuring range | 1.00 ... 225.0 mm / 0.04 ... 8.85" |
| Resolution | 0.01 mm at ≤99.99 mm |
| 0.1 mm at ≥100.0 mm | |
| Accuracy | ±0.5 % of measured value + 0.05 mm |
| Storage space | 500 measured values |
| Probe frequency | 5 MHz |
| Standard sensor | sensor PCE-TG 5M10d |
| Further specifications | |
| Adjustable speed of sound | 1000 ... 9999 m/s |
| Smallest pipe diameter | Ø20 x 3 mm (steel) |
| Material library | 15 memory locations |
| Calibration reference | 4 mm |
| Display | 2.4 inch TFT LCD color display |
| with brightness adjustment | |
| Power supply | 3 x 1.5 V AA batteries |
| Automatic switch-off | switched off, 2, 5, 10, 30 minutes |
| Ambient conditions | 0 ... 40 °C / 32 ... 104 °F, <90 % RH, non-condensing |
| Dimensions | 163 x 82 x 38 mm / 6.4 x 3.2 x 1.5" |
| Weight | 320 g / 11.2 oz |
DELIVERY SCOPE
1 x Ultrasonic Thickness Gauges PCE-TG 75
1 x Sensor PCE-TG 5M10d
1 x Coupling gel (TT-GEL)
1 x Transport bag
3 x 1.5 V AA batteries
1 x Quick start guide
