• Ultrasonic Thickness Gauge PCE-TG 300-NO7
  • Ultrasonic Thickness Gauge PCE-TG 300-NO7
  • Ultrasonic Thickness Gauge PCE-TG 300-NO7
  • Ultrasonic Thickness Gauge PCE-TG 300-NO7
  • Ultrasonic Thickness Gauge PCE-TG 300-NO7

Ultrasonic Thickness Gauge PCE-TG 300-NO7

Giao hàng miễn phí toàn quốc

Hỗ trợ tư vấn kỹ thuật 24/7 (cả dịp Lễ, Tết)

Bảo hành nhanh chóng khi khách hàng phản hồi

  • Products code

    :  PCE-TG 300-NO7
  • Brands

    :  PCE Instruments
  • Guarantee

    :  12 Tháng
  • Product Price

    :  Liên hệ

Giá tốt hơn nơi đâu bạn thấy!

Liên hệ mua hàng

0949 523 279

Ultrasonic Thickness Gauge PCE-TG 300-NO7

Ultrasonic thickness gauge
Large measuring range / Up to 600 mm / Pulse-echo or echo-echo mode /  For all homogeneous materials / Print function via Bluetooth / USB connection

The PCE-TG 300-NO7 is an ultrasonic thickness gauge with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the thickness meter and thus adapted to a wide variety of materials.

The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured (only with PCE-TG 300-P5EE sensor).

 

HIGHLIGHTS

- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth

SPECIFICATION

PCE-TG-NO7 sensor  
Measuring range 0.65 ... 200 mm / 0.025 ...  7.87" (steel)
Minimum diameter of pipes    15 x 2 mm / 0.59 x 0.07"
Frequency 7 MHz
Diameter 6 mm / 0.23"
Description for thin-walled or strongly curved pipes
PCE-TG 300-NO7 device  
Measuring range P-E: pulse-echo mode 0.65 ... 600 mm / 0.025 ... 23.62" (steel)"
  (measurement range varies depending on the sensor)
  E-E: Echo-Echo mode 2.50 ... 100 mm / 0.098 ... 2.36"
  (only with PCE-TG 300-P5EE sensor)
Accuracy ±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm)
  H refers to the material thickness of the workpiece
Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Measurable materials metals
  plastics
  ceramics
  epoxy resin
  glass
  and all homogeneous materials
Working modes Pulse-echo mode (fault and void detection)
  Echo-echo mode (hide layer thicknesses, e.g. paint)
Calibration sound velocity calibration
  zero calibration
  two-point calibration
View Mode Normal Mode, Scan Mode, Difference Mode
Units mm / inch
Data transfer printing via Bluetooth / USB 2.0
Memory non-volatile memory with 100 data groups with 100 data sets each
Operating time continuous operation 100 h
  automatic stand-by mode (adjustable)
  auto power off mode (adjustable)
Power supply 4 x AA battery 1.5 V
Display 320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions 0 ... +50 °C / 32 ... 122 °F, ≤80 % RH non-condensing
Storage conditions -20 ... +70 °C / -4 ... 158 °F, ≤80 % RH non-condensing
Dimensions 185 x 97 x 40 mm / 7.2 x 3.8 x 1.5"
Weight 375 g / 13.2 oz

 

DELIVERY SCOPE

1 x Ultrasonic thickness gauge PCE-TG 300-NO7
1 x Sensor PCE-TG-NO7
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual

doi tac 8
doi tac 6
doi tac 7
doi tac 3
doi tac 4
doi tac 5
doi tac 1
doi tac 2