SMP10 Pyranometer Kipp & Zonen Viet Nam
Giao hàng miễn phí toàn quốc
Hỗ trợ tư vấn kỹ thuật 24/7 (cả dịp Lễ, Tết)
Bảo hành nhanh chóng khi khách hàng phản hồi
Mã sản phẩm
: SMP10Thương hiệu
: KIPPZONENXuất xứ
: Hà LanBảo hành
: 12 ThángTình trạng
: Hàng Mới 100%Giá sản phẩm
: Liên hệ
Giá tốt hơn nơi đâu bạn thấy!
SMP10 Pyranometer Kipp & Zonen Viet Nam
The SMP10 is a Spectrally Flat Class A pyranometer that combines the sensor technology from the CMP 11, the Smart interface from the SMP11 and the low maintenance from the CMP10. The SMP10 has an internal drying cartridge that will last for at least 10 years if the housing is not opened. This minimizes maintenance significantly. The interval for dome cleaning can be extended, and the quality of measurements maximized, by fitting SMP10 with the CVF4 ventilation unit. The SMP10 has Modbus® interface, amplified analogue output, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological and solar energy stations easy. The SMP10 is protected against over voltage, reversed polarity and short circuiting. Thanks to the standardized output and connections of every SMP10, exchanging instruments for recalibration is easy. SmartExplorer Windows™ software for data logging, display of data and Modbus® address setting is provided as standard.
Benefits
ISO / IEC classification
ISO 9060 spectrally flat Class A, with ISO / IEC 17025 calibration.
Minimized maintenance
No desiccant change for 10 years, best MTBF with 5 years warranty.
Smart interface
Modbus RTU interface, wide temperature correction range and very low power consumption. Both digital and analog outputs available. No need to adjust data logger after recalibration.
Specifications
Technical Attributes
| Analog Outputs | 0 - 1 V (V-model) or 4 - 20 mA (A-model) |
| Cable Length | 33, 82, 164, 330 ft (10, 25, 50, 100 m) |
| Classification | Spectrally Flat Class A (ISO 9060:2018) |
| Digital Outputs | Modbus RTU 2-wire RS-485 |
| Directional Response | ˂ 15 W/m² (up to 80 ° with 1000 W/m² beam) |
| Drying Cartridge and Maintenance Interval | Internal, lasts for 10 years, replaced with every recalibration |
| IP Rating | IP67 |
| Irradiance Saturation | 4000 W/m² (Max.) |
| Material Enclosures | Aluminum, anodised |
| Non-linearity | ˂ 1 % (0 - 100 W/m²) |
| Non-stability | ˂ 1 % (change/year) |
| Operating Humidity | 0 - 100 % |
| Operating Temperature Range | -40 to +176 °F (-40 to +80 °C) |
| Response Time | ˂ 0.7 s (63 %), ˂ 2 s (95 %) |
| Sensitivity | N.A. |
| Spectral Accuracy | 285 to 2800 nm |
| Temperature Correction | ˂ 0.3 %: -4 to +122 °F (-20 to +50 °C) |
| Weight | 1.3 lb (600 g) |
| Zero offset A | ˂ 10 W/m² |
| Zero offset B | ˂l 4 W/m² |
