SI-H100 Sampling Type Gas Detector SENKO

1. SI-H100 Sampling Type Gas Detector SENKO

• Oxygen O2 Absorbent Detector SI-H100 Senko is a gas measuring device of Senko (Korea) with the following characteristics:
• Simple installation, easy to use the product.
• Pump system with 2 year life (Sampling up to 30M).
• Smart sensor slot on board.
• Large bright icon-based graphic LCD Intuitive with various expressions.
• 3 built-in relays for Warning 1, 2 and Fault.
• Optional Pyrolyzer module.
• 4-20mA analog output with event and error alarms.
• Modbus/TCP Ethernet can be easily connected to all ports of the alarm and control system.
• Update to the latest firmware version available via the web.
• RS-485, TCP Ethernet for alarm and communication system connectivity – Parts per billion (ppb) gas detection.

2. Specifications of SI-H100 Sampling Type Gas Detector SENKO

• PoE: 36V ~ 57V (Typical: 48V)
• Flow Rate: 500mL/min (MAX 900)
• Operating Temperature: 0°C ~ 40°C
• Power Consumption: About 5.0W
• Measurement display: Graphic LCD (160 X 100), gas concentration, flow rate, warning, backlight, abnormal device
• Alarm: 90dB at 10cm
• Main alarm: Relay, Secondary alarm, Fault alarm
• Output signal: Analog, 4-20mA
• Digital communication: RS-485, TCP Ethernet
• Sampling distance: Length of air inlet tube: up to 30m (FEP tube)
• Length of exhaust pipe: up to 30m (FEP tube) inlet/outlet hose 1/4” Teflon tube
• CE certification
• Control Button / Set 4 & RS485 & Ethernet
• DC operating voltage: 24V ± 10%
• Remote Interface: Ethernet, RS-485, Wire 4 to 20mA / DC Power / Relay: up to 14 AWG, ETC Update to the latest firmware version available via web
• Dimensions: 124mm (H) X 65mm (W) X 155mm (D)
• Weight: 2Kg
• Equipment warranty: 2 years
• Sensor warranty: 1 year. 

3. Features of SI-H100 Sampling Type Gas Detector SENKO

• Sampling type Gas Detector (SI-H100) measures sample gas by sensor box in case of remote aspiration on a real-time basis. , corrosion, etc. in many semiconductor or industrial locations.
• The SI-H100 measures gas concentrations in real time continuously and displays warnings about dangerous concentrations, breakdown situations, and more. when mounted on the wall. By operating the four buttons on the lower part of the screen, you can easily modify your device's environment settings.
• The measured gas concentration is transmitted with 4-20mA output on a real-time basis and the external operations according to the desired situations can be organized differently by the three internal relays. In addition, it is possible to output MODBUS/TCP, and solve data transmission and power at the same time with only LAN cable (PoE).

Contact information Hotline: 0949 523 279, Email: [email protected], Website: hqplus.com.vn.

Address: 19th Floor, Indochina Building, 4 Nguyen Dinh Chieu, Da Kao Ward, District 1, HCM City.